Professionally made mosfet designed for airsoft electric pistols (AEP).
Device increases gun rate of fire and battery hlasts longer, than with basic wiring.
Can be installed without modifications into these AEP:
Cyma CM.030 Glock 18C
Cyma CM.121 Desert Eagle
Cyma CM.122 SIG P226
Cyma CM.123 Colt M1911
Cyma CM.125 H&K USP
Cyma CM.126 Beretta M92F
Cyma CM.127 Phantom
Cyma CM.128 HI-CAPA 5.1
Tokyo Marui Glock 18C AEP
Tokyo Marui Beretta M93R AEP
Tokyo Marui Beretta M9A1 AEP
Tokyo Marui HK USP AEP
Umarex HK USP AEP
Double Eagle M81 USP
SPECIFICATIONS:
- Very small device dimension - used Micro mosfet II
- Prepared wiring allows fast and easy installation into the pistol. Simply solder wires to the motor and trigger contacts
- On the devices are pre-soldered high-quality power wires 0,5 qmm (AWG20) with silicone insulation (length 210mm from mosfet) and blue wires 0.25 qmm (AWG24) with PVC insulation (length 110mm from mosfet)
- Connector for the battery is used JST-SYR 2 pin
- Coated with lacquer, it protects the device against water
- If you want to use your own wires or connector, choose Micro mosfet II without wiring
- Can be used with any AEP upgrade, because it was designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s)
- Recommended to use 7,4V lipo battery, but the device is specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- 6 wires connection
- Device size 15x7x5mm
- No current consumption in the idle mode
- No sparking on switch contacts
