Skip to product information
1 of 7

Findsworth

ELEGOO PLA Plus Filament 1.75mm White — 2×1kg Spools, Tough & Low-Warp

ELEGOO PLA Plus Filament 1.75mm White — 2×1kg Spools, Tough & Low-Warp

Regular price £75.85 GBP
Regular price £86.95 GBP Sale price £75.85 GBP
Sold out
Taxes included. Shipping calculated at checkout.
Quantity

ELEGOO PLA Plus 1.75mm White is a tougher, low-warp PLA variant supplied as two 1kg spools designed for consistent, clean feeding and improved impact resistance in FDM 3D prints.

Whether you're printing functional prototypes, durable hobby parts, or display models, this PLA+ blend from ELEGOO balances ease of use with enhanced mechanical properties. The kit includes two 1kg spools (2KG total) of white filament manufactured to a tight diameter tolerance of +/- 0.02mm, vacuum dried and sealed to reduce moisture-related problems. It’s compatible with most standard 1.75mm FDM printers and formulated to minimize warping while delivering a glossy surface and reliable layer adhesion.

How does this PLA Plus improve part durability compared to standard PLA?

ELEGOO’s PLA Plus is engineered for higher toughness and impact resistance than ordinary PLA, making it better suited for parts that experience stress or occasional knocks. The polymer blend reduces brittle failure and improves the lifespan of functional prints while still printing at relatively low temperatures.

  • Higher impact strength for more durable hinges and clips
  • Reduced brittleness for improved part longevity
  • Good layer bonding to resist delamination under load

Will I get consistent extrusion and fewer print interruptions?

Yes — the filament is produced with precise diameter control and a +/-0.02mm tolerance to promote smooth, uninterrupted feeding. Each spool is mechanically wound and visually inspected to lower the chance of tangles, snaps, or feeding jams during long prints.

  • Precise 1.75mm diameter for uniform extrusion
  • Neatly wound spools reduce tangles and filament snags
  • Vacuum-sealed, dried packaging to prevent moisture-induced bubbling and clogging

What print quality and surface finish can I expect?

Printed parts show a glossy surface and clear layer definition thanks to optimized deposition and strong inter-layer adhesion. The material flows predictably at PLA-like temperatures, giving you crisp details and a smooth finish suitable for display parts as well as functional prototypes.

  • Glossy finish for visually appealing models
  • Accurate detail reproduction and smooth layers
  • Lower printing temperatures reduce stringing and thermal warping

How easy is it to use this filament with common FDM printers?

ELEGOO PLA Plus is designed to be user-friendly and broadly compatible with most 1.75mm FDM machines. Its dimensional consistency and pre-dried packaging help reduce common user issues like nozzle clogs or bubbling caused by moisture, so setup and printing are straightforward for hobbyists and pros alike.

  • Works with most 1.75mm Bowden and direct-drive systems
  • No special extrusion hardware required; prints at typical PLA temperatures
  • Pre-packed in vacuum to keep filament dry until use

Who is this product for? Makers who want an easy-to-print filament with upgraded toughness will appreciate ELEGOO PLA Plus. It’s suitable for hobbyists, educators, designers, and small workshops creating functional prototypes, mechanical parts, or polished display pieces. If you need a reliable 1.75mm filament that reduces print interruptions and improves part durability without moving to higher-temperature engineering plastics, this dual-spool pack is a practical choice.

FAQ

Q: What printers does ELEGOO PLA Plus fit?

A: This 1.75mm PLA+ works with most FDM printers using 1.75mm filament, including Bowden and direct-drive extruders.

Q: Do I need to dry the filament before printing?

A: Filaments are vacuum dried and sealed, but if stored open in humid conditions, a short dry cycle is recommended.

View full details